Event Type In-Class
July
Time
July 14(Tuesday) 8:30AM - 12:00PM(GMT+07:00)
Event Details
Discover the Next Generation of Hydrographic Survey Technology Join us at the R3VOX Voxometer Workshop, an exclusive product knowledge session introducing the R3VOX Voxometer—the only MA3 Multi-Aspect™ Survey System, designed to
Event Details
Discover the Next Generation of Hydrographic Survey Technology
more
Time
July 16(Thursday) 8:30AM - 12:00PM(GMT+07:00)
Event Details
Discover the Next Generation of Hydrographic Survey Technology Join us at the R3VOX Voxometer Workshop, an exclusive product knowledge session introducing the R3VOX Voxometer—the only MA3 Multi-Aspect™ Survey System, designed to
Event Details
Discover the Next Generation of Hydrographic Survey Technology
📍 Venue: Hotel Kampi, Surabaya
🎤 Speaker: Jacob Van Oostroom – Managing Director, R2C Pte Ltd
more
2026Tue21JulAll DayWed22[BATCH 39 Acquisition] EIVA Navisuite Training
Time
July 21(Tuesday) - July 22(Wednesday) (All Day)(GMT+07:00)
Event Details
Experienced and certified EIVA instructors will take you through the course curriculum and assist you on the road to improving your EIVA skills. Venue & Language Information The course will be conducted
Event Details
Experienced and certified EIVA instructors will take you through the course curriculum and assist you on the road to improving your EIVA skills.
Venue & Language Information
The course will be conducted in Bahasa Indonesia and held in Geotronix office in Jakarta. Please scroll down further to check on detailed venue information.
Entry Requirement
No prior knowledge of the EIVA Navisuite software solutions is required.
Training Days
July 21st – 22nd, 2026 : NaviPac 4.6.2 and NaviScan 9.7.6
Learning Objectives
The course is structured around a general curriculum with the aim being to furnish the trainees with a broad understanding of the EIVA NaviSuite online software solutions and make them confident in using these software solutions on a vessel.
To enhance trainee competence and confidence, typical construction support and acquisition scenarios are used as examples throughout the training. For the most part, the course is conducted as hands-on training, thus taking advantage of the comprehensive simulation functionalities that have been implemented into the NaviPac and NaviScan software solutions.
During the course, trainees are guided through how to:
Day 1
-
- Install the relevant NaviSuite software solutions
- Understand the basic architecture of NaviPac
- Configure NaviPac with common instruments, geodesy, objects, etc
- Run various programs for different tasks (calibration, documentation, QA)
- Log survey data for different tasks and in different formats
- Start, configure, and use the Helmsman’s Display
- Create and manipulate waypoints and runlines
- Use different map background formats
Day 2
-
- Understand the basic architecture of NaviScan
- Configure NaviScan with common instruments, geodesy, objects, etc
- Control the logging process from the Helmsman’s Display
- Start and configure the Online 3D utility
Target Group
The course is aimed towards surveyor who have basic survey knowledge.
Duration
The duration of the classroom training is 2 (two) days, from 9.00 – 16.00, including breaks.
Completion
An EIVA NaviSuite training certificate is issued to each trainee upon completion of the course.
Access to NaviSuite
EIVA NaviSuite can be downloaded from EIVA website (https://download.eiva.com/#) for preparation purposes and can partially run-in demo/simulation mode.
Additional information
- PCs/Laptops are provided by trainee with the requirement, as follow: https://eiva.freshdesk.com/support/solutions/articles/43000487485-eiva-navisuite-hardware-and-software-requirements
- Hotel and accommodations are prepared by trainee.
- Course included lunch, snacks, and coffee.
- Free EIVA NaviSuite licenses during training
- Free 30 days EIVA e-learning acces
For further information, please contact eiva@geotronix.co.id
more
Organizer
Geotronix Indonesia
2026Thu23JulAll DayFri24[BATCH 39 Processing] EIVA Navisuite Training
Time
July 23(Thursday) - July 24(Friday) (All Day)(GMT+07:00)
Event Details
Experienced and certified EIVA instructors will take you through the course curriculum and assist you on the road to improving your EIVA skills. Venue & Language Information The course will be conducted
Event Details
Experienced and certified EIVA instructors will take you through the course curriculum and assist you on the road to improving your EIVA skills.
Venue & Language Information
The course will be conducted in Bahasa Indonesia and held in Geotronix office in Jakarta. Please scroll down further to check on detailed venue information.
Entry Requirement
No prior knowledge of the EIVA Navisuite software solutions is required.
Training Days
July 23rd – 24th, 2026: NaviEdit 8.8, NaviModel 4.8, and NaviPlot 2.5
Learning Objectives
The course is structured around a general curriculum with the aim being to furnish the trainees with a broad understanding of the EIVA NaviSuite offline software solutions and make them confident in using these software solutions in postprocessing situations.
To enhance trainee competence and confidence, a wide range of typical hydrographic survey data, acquired using the EIVA NaviSuite online software solutions, are used to exemplify typical post-processing scenarios. For the most part, the course is conducted as hands-on training.
During the course, trainees are guided through how to:
Day 1
-
- Install the relevant NaviSuite software solutions
- Understand the basic architecture of NaviEdit, NaviModel and NaviPlot
- Conduct editing of multi-beam and single beam data in a NaviEdit/NaviModel environment
- Conduct a patch test calibration in NaviModel/NaviEdit
Day 2
-
- Use the EC-3D automatic cleaning tool, semi-automatic, and manual
- Use the various DTM tools in NaviModel
- Conduct volume and area calculations in NaviModel
- Export data from NaviModel using generic as well as built-in tools
- Create simple plots in NaviPlot
- Create plot series in NaviPlot using the Chart Layout Manager
Target Group
The course is aimed towards processor who have basic survey knowledge.
Duration
The duration of the classroom training is two days, from 9.00 – 16.00, including breaks.
Completion
An EIVA NaviSuite training certificate is issued to each trainee upon completion of the course.
Access to NaviSuite
EIVA NaviSuite can be downloaded from EIVA website (https://download.eiva.com/#) for preparation purposes and can partially run-in demo/simulation mode.
Additional Information
- PCs/Laptops are provided by trainee with the requirement, as follow: https://eiva.freshdesk.com/support/solutions/articles/43000487485-eiva-navisuite-hardware-and-software-requirements
- Hotel and accommodations are prepared by trainee
- Course included lunch, snacks, and coffee.
- Free EIVA NaviSuite licenses during training
- Free 30 days EIVA e-learning acces
For further information, please contact eiva@geotronix.co.id
more
Organizer
Geotronix Indonesia
August
2026Tue18AugAll DayWed19[BATCH 40 Acquisition] EIVA Navisuite Training
Time
August 18(Tuesday) - August 19(Wednesday) (All Day)(GMT+07:00)
Event Details
Experienced and certified EIVA instructors will take you through the course curriculum and assist you on the road to improving your EIVA skills. Venue & Language Information The course will be conducted
Event Details
Experienced and certified EIVA instructors will take you through the course curriculum and assist you on the road to improving your EIVA skills.
Venue & Language Information
The course will be conducted in Bahasa Indonesia and held in Geotronix office in Jakarta. Please scroll down further to check on detailed venue information.
Entry Requirement
No prior knowledge of the EIVA Navisuite software solutions is required.
Training Days
August 18th – 29th, 2026 : NaviPac 4.6.2 and NaviScan 9.7.6
Learning Objectives
The course is structured around a general curriculum with the aim being to furnish the trainees with a broad understanding of the EIVA NaviSuite online software solutions and make them confident in using these software solutions on a vessel.
To enhance trainee competence and confidence, typical construction support and acquisition scenarios are used as examples throughout the training. For the most part, the course is conducted as hands-on training, thus taking advantage of the comprehensive simulation functionalities that have been implemented into the NaviPac and NaviScan software solutions.
During the course, trainees are guided through how to:
Day 1
-
- Install the relevant NaviSuite software solutions
- Understand the basic architecture of NaviPac
- Configure NaviPac with common instruments, geodesy, objects, etc
- Run various programs for different tasks (calibration, documentation, QA)
- Log survey data for different tasks and in different formats
- Start, configure, and use the Helmsman’s Display
- Create and manipulate waypoints and runlines
- Use different map background formats
Day 2
-
- Understand the basic architecture of NaviScan
- Configure NaviScan with common instruments, geodesy, objects, etc
- Control the logging process from the Helmsman’s Display
- Start and configure the Online 3D utility
Target Group
The course is aimed towards surveyor who have basic survey knowledge.
Duration
The duration of the classroom training is 2 (two) days, from 9.00 – 16.00, including breaks.
Completion
An EIVA NaviSuite training certificate is issued to each trainee upon completion of the course.
Access to NaviSuite
EIVA NaviSuite can be downloaded from EIVA website (https://download.eiva.com/#) for preparation purposes and can partially run-in demo/simulation mode.
Additional information
- PCs/Laptops are provided by trainee with the requirement, as follow: https://eiva.freshdesk.com/support/solutions/articles/43000487485-eiva-navisuite-hardware-and-software-requirements
- Hotel and accommodations are prepared by trainee.
- Course included lunch, snacks, and coffee.
- Free EIVA NaviSuite licenses during training
- Free 30 days EIVA e-learning acces
For further information, please contact eiva@geotronix.co.id
more
Organizer
Geotronix Indonesia
2026Thu20AugAll DayFri21[BATCH 40 Processing] EIVA Navisuite Training
Time
August 20(Thursday) - August 21(Friday) (All Day)(GMT+07:00)
Event Details
Experienced and certified EIVA instructors will take you through the course curriculum and assist you on the road to improving your EIVA skills. Venue & Language Information The course will be conducted
Event Details
Experienced and certified EIVA instructors will take you through the course curriculum and assist you on the road to improving your EIVA skills.
Venue & Language Information
The course will be conducted in Bahasa Indonesia and held in Geotronix office in Jakarta. Please scroll down further to check on detailed venue information.
Entry Requirement
No prior knowledge of the EIVA Navisuite software solutions is required.
Training Days
August 20th – 21st, 2026: NaviEdit 8.8, NaviModel 4.8, and NaviPlot 2.5
Learning Objectives
The course is structured around a general curriculum with the aim being to furnish the trainees with a broad understanding of the EIVA NaviSuite offline software solutions and make them confident in using these software solutions in postprocessing situations.
To enhance trainee competence and confidence, a wide range of typical hydrographic survey data, acquired using the EIVA NaviSuite online software solutions, are used to exemplify typical post-processing scenarios. For the most part, the course is conducted as hands-on training.
During the course, trainees are guided through how to:
Day 1
-
- Install the relevant NaviSuite software solutions
- Understand the basic architecture of NaviEdit, NaviModel and NaviPlot
- Conduct editing of multi-beam and single beam data in a NaviEdit/NaviModel environment
- Conduct a patch test calibration in NaviModel/NaviEdit
Day 2
-
- Use the EC-3D automatic cleaning tool, semi-automatic, and manual
- Use the various DTM tools in NaviModel
- Conduct volume and area calculations in NaviModel
- Export data from NaviModel using generic as well as built-in tools
- Create simple plots in NaviPlot
- Create plot series in NaviPlot using the Chart Layout Manager
Target Group
The course is aimed towards processor who have basic survey knowledge.
Duration
The duration of the classroom training is two days, from 9.00 – 16.00, including breaks.
Completion
An EIVA NaviSuite training certificate is issued to each trainee upon completion of the course.
Access to NaviSuite
EIVA NaviSuite can be downloaded from EIVA website (https://download.eiva.com/#) for preparation purposes and can partially run-in demo/simulation mode.
Additional Information
- PCs/Laptops are provided by trainee with the requirement, as follow: https://eiva.freshdesk.com/support/solutions/articles/43000487485-eiva-navisuite-hardware-and-software-requirements
- Hotel and accommodations are prepared by trainee
- Course included lunch, snacks, and coffee.
- Free EIVA NaviSuite licenses during training
- Free 30 days EIVA e-learning acces
For further information, please contact eiva@geotronix.co.id
more
Organizer
Geotronix Indonesia
September
2026Tue15SepAll DayWed16[BATCH 41 Acquisition] EIVA Navisuite Training
Time
September 15(Tuesday) - September 16(Wednesday) (All Day)(GMT+07:00)
Event Details
Experienced and certified EIVA instructors will take you through the course curriculum and assist you on the road to improving your EIVA skills. Venue & Language Information The course will be conducted
Event Details
Experienced and certified EIVA instructors will take you through the course curriculum and assist you on the road to improving your EIVA skills.
Venue & Language Information
The course will be conducted in Bahasa Indonesia and held in Geotronix office in Jakarta. Please scroll down further to check on detailed venue information.
Entry Requirement
No prior knowledge of the EIVA Navisuite software solutions is required.
Training Days
September 15th – 16th, 2026 : NaviPac 4.6.2 and NaviScan 9.7.6
Learning Objectives
The course is structured around a general curriculum with the aim being to furnish the trainees with a broad understanding of the EIVA NaviSuite online software solutions and make them confident in using these software solutions on a vessel.
To enhance trainee competence and confidence, typical construction support and acquisition scenarios are used as examples throughout the training. For the most part, the course is conducted as hands-on training, thus taking advantage of the comprehensive simulation functionalities that have been implemented into the NaviPac and NaviScan software solutions.
During the course, trainees are guided through how to:
Day 1
-
- Install the relevant NaviSuite software solutions
- Understand the basic architecture of NaviPac
- Configure NaviPac with common instruments, geodesy, objects, etc
- Run various programs for different tasks (calibration, documentation, QA)
- Log survey data for different tasks and in different formats
- Start, configure, and use the Helmsman’s Display
- Create and manipulate waypoints and runlines
- Use different map background formats
Day 2
-
- Understand the basic architecture of NaviScan
- Configure NaviScan with common instruments, geodesy, objects, etc
- Control the logging process from the Helmsman’s Display
- Start and configure the Online 3D utility
Target Group
The course is aimed towards surveyor who have basic survey knowledge.
Duration
The duration of the classroom training is 2 (two) days, from 9.00 – 16.00, including breaks.
Completion
An EIVA NaviSuite training certificate is issued to each trainee upon completion of the course.
Access to NaviSuite
EIVA NaviSuite can be downloaded from EIVA website (https://download.eiva.com/#) for preparation purposes and can partially run-in demo/simulation mode.
Additional information
- PCs/Laptops are provided by trainee with the requirement, as follow: https://eiva.freshdesk.com/support/solutions/articles/43000487485-eiva-navisuite-hardware-and-software-requirements
- Hotel and accommodations are prepared by trainee.
- Course included lunch, snacks, and coffee.
- Free EIVA NaviSuite licenses during training
- Free 30 days EIVA e-learning acces
For further information, please contact eiva@geotronix.co.id
more
Organizer
Geotronix Indonesia
2026Thu17SepAll DayFri18[BATCH 41 Processing] EIVA Navisuite Training
Time
September 17(Thursday) - September 18(Friday) (All Day)(GMT+07:00)
Event Details
Experienced and certified EIVA instructors will take you through the course curriculum and assist you on the road to improving your EIVA skills. Venue & Language Information The course will be conducted
Event Details
Experienced and certified EIVA instructors will take you through the course curriculum and assist you on the road to improving your EIVA skills.
Venue & Language Information
The course will be conducted in Bahasa Indonesia and held in Geotronix office in Jakarta. Please scroll down further to check on detailed venue information.
Entry Requirement
No prior knowledge of the EIVA Navisuite software solutions is required.
Training Days
September 17th – 18th, 2026: NaviEdit 8.8, NaviModel 4.8, and NaviPlot 2.5
Learning Objectives
The course is structured around a general curriculum with the aim being to furnish the trainees with a broad understanding of the EIVA NaviSuite offline software solutions and make them confident in using these software solutions in postprocessing situations.
To enhance trainee competence and confidence, a wide range of typical hydrographic survey data, acquired using the EIVA NaviSuite online software solutions, are used to exemplify typical post-processing scenarios. For the most part, the course is conducted as hands-on training.
During the course, trainees are guided through how to:
Day 1
-
- Install the relevant NaviSuite software solutions
- Understand the basic architecture of NaviEdit, NaviModel and NaviPlot
- Conduct editing of multi-beam and single beam data in a NaviEdit/NaviModel environment
- Conduct a patch test calibration in NaviModel/NaviEdit
Day 2
-
- Use the EC-3D automatic cleaning tool, semi-automatic, and manual
- Use the various DTM tools in NaviModel
- Conduct volume and area calculations in NaviModel
- Export data from NaviModel using generic as well as built-in tools
- Create simple plots in NaviPlot
- Create plot series in NaviPlot using the Chart Layout Manager
Target Group
The course is aimed towards processor who have basic survey knowledge.
Duration
The duration of the classroom training is two days, from 9.00 – 16.00, including breaks.
Completion
An EIVA NaviSuite training certificate is issued to each trainee upon completion of the course.
Access to NaviSuite
EIVA NaviSuite can be downloaded from EIVA website (https://download.eiva.com/#) for preparation purposes and can partially run-in demo/simulation mode.
Additional Information
- PCs/Laptops are provided by trainee with the requirement, as follow: https://eiva.freshdesk.com/support/solutions/articles/43000487485-eiva-navisuite-hardware-and-software-requirements
- Hotel and accommodations are prepared by trainee
- Course included lunch, snacks, and coffee.
- Free EIVA NaviSuite licenses during training
- Free 30 days EIVA e-learning acces
For further information, please contact eiva@geotronix.co.id
more
Organizer
